D-Link DES-3010F Command Line Interface Manual page 37

show snmp view
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display SNMP view configuration:
DES-3026:4#show snmp view
Command: show snmp view
Vacm View Table Settings
View Name
--------------------
restricted
restricted
restricted
restricted
restricted
CommunityView
CommunityView
CommunityView
Total Entries
DES-3026:4#
create snmp community
Purpose
Syntax
Description
Parameters
DES-3000 Series Layer 2 Switch CLI Reference Manual
Used to display an SNMP view previously created on the Switch.
show snmp view {<view_name 32>}
The show snmp view command displays an SNMP view previously
created on the Switch.
<view_name 32>  An alphanumeric string of up to 32 characters
that identifies the SNMP view that will be displayed.
None.
Subtree
-------------------------
1.3.6.1.2.1.1
1.3.6.1.2.1.11
1.3.6.1.6.3.10.2.1
1.3.6.1.6.3.11.2.1
1.3.6.1.6.3.15.1.1
1
1.3.6.1.6.3
1.3.6.1.6.3.1
: 8
Used to create an SNMP community string to define the relationship
between the SNMP manager and an agent. The community string
acts like a password to permit access to the agent on the Switch.
One or more of the following characteristics can be associated with
the community string:
An Access List of IP addresses of SNMP managers that are permitted
to use the community string to gain access to the Switch's SNMP
agent.
An MIB view that defines the subset of all MIB objects that will be
accessible to the SNMP community.
Read/write or read-only level permission for the MIB objects
accessible to the SNMP community.
create snmp community <community_string 32> view
<view_name 32> [read_only | read_write]
The create snmp community command is used to create an SNMP
community string and to assign access-limiting characteristics to this
community string.
<community_string 32>  An alphanumeric string of up to 32
characters that is used to identify members of an SNMP community.
This string is used like a password to give remote SNMP managers
access to MIB objects in the Switch's SNMP agent.
<view_name 32>  An alphanumeric string of up to 32 characters that
is used to identify the group of MIB objects that a remote SNMP
33
View Type
----------
Included
Included
Included
Included
Included
Included
Excluded
Included