create snmp group
Restrictions
Example usage:
To create an SNMP group named "sg1:"
DES-3026:4#create snmp group sg1 v3 noauth_nopriv
read_view v1 write_view v1 notify_view v1
Command: create snmp group sg1 v3 noauth_nopriv
read_view v1 write_view v1 notify_view v1
Success.
DES-3026:4#
delete snmp group
Purpose
Syntax
Description
Parameters
Restrictions
DES-3000 Series Layer 2 Switch CLI Reference Manual
encryption of packets sent between the Switch and a remote SNMP
manager.
auth_nopriv Specifies that authorization will be required, but there
will be no encryption of packets sent between the Switch and a
remote SNMP manager.
auth_priv Specifies that authorization will be required, and that
packets sent between the Switch and a remote SNMP manger will
be encrypted.
read_view – Specifies that the SNMP group being created can
request SNMP messages.
<view_name 32> An alphanumeric string of up to 32
characters that is used to identify the group of MIB objects that
a remote SNMP manager is allowed to access on the Switch.
write_view – Specifies that the SNMP group being created has write
privileges.
<view_name 32> An alphanumeric string of up to 32
characters that is used to identify the group of MIB objects that
a remote SNMP manager is allowed to access on the Switch.
notify_view Specifies that the SNMP group being created can
receive SNMP trap messages generated by the Switch's SNMP
agent.
<view_name 32> An alphanumeric string of up to 32
characters that is used to identify the group of MIB objects that
a remote SNMP manager is allowed to access on the Switch.
Only Administrator-level users can issue this command.
Used to remove an SNMP group from the Switch.
delete snmp group <groupname 32>
The delete snmp group command is used to remove an SNMP
group from the Switch.
<groupname 32> An alphanumeric name of up to 32 characters
that will identify the SNMP group with which the new SNMP user
will be associated.
Only Administrator-level users can issue this command.
37