D-Link DES-3010F Command Line Interface Manual page 63

Example usage:
To configure the state of dhcp_relay option 60:
DES-3026:4# config dhcp_relay option_60 state enable
Command: config dhcp_relay option_60 state enable
Success
DES-3026:4#
config dhcp_relay option_60 add
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To configure dhcp_relay option 60:
DES-3026:4# config dhcp_relay option_60 add match string abc relay
10.90.90.1
Command: config dhcp_relay option_60 add match string abc relay
10.90.90.1
Success
DES-3026:4#
DES-3000 Series Layer 2 Switch CLI Reference Manual
Used to add a entry for dhcp_relay option_60.
configure dhcp_relay option_60 add string <desc 255> relay
<ipaddr> [exact-match|partial-match]
This command configures the option 60 relay rules. Note that
different string can be specified with the same relay server, and the
same string can be specified with multiple relay servers.
The system will relay the packet to all the matching servers.
exact-match – The option 60 string in the packet must fully match
with the specified string.
partial-match – The option 60 string in the packet only needs to
partially match the specified string.
string – The specified string.
<ipaddr> – Specify a relay server IP address.
Only Administrator-level users can issue this command.
59