D-Link DES-3010F Command Line Interface Manual page 24

save
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To save the Switch's current configuration to non-volatile RAM:
DES-3026:4#save
Command: save
Saving all configurations to NV-RAM...
DES-3026:4#
reboot
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To restart the Switch:
DES-3026:4#reboot
Command: reboot
Are you sure want to proceed with the system reboot? (y/n)
DES-3000 Series Layer 2 Switch CLI Reference Manual
Used to save changes in the Switch's configuration to non-volatile
RAM.
save {[config | log | all]}
This command is used to enter the current switch configuration into
non-volatile RAM. The saved switch configuration will be loaded into
the Switch's memory each time the Switch is restarted.
config – Save configuration to NV-RAM.
log – Save history log.
all – Save configuration and log.
Only Administrator-level users can issue this command.
Used to restart the Switch.
reboot {force_agree}
This command is used to restart the Switch.
force_agree – Entering this parameter will bypass the "Are you
sure?" question and immediately reboot the switch.
None.
Done.
20