D-Link DES-3010F Command Line Interface Manual page 190

show auth_diagnostics
Parameters
Restrictions
Example usage:
To display the current authentication diagnostics for port 16:
DES-3026:4#show auth_diagnostics ports 1
Command: show auth_diagnostics ports 1
Port number : 1
EntersConnecting
EapLogoffsWhileConnecting
EntersAuthenticating
SuccessWhileAuthenticating
TimeoutsWhileAuthenticating
FailWhileAuthenticating
ReauthsWhileAuthenticating
EapStartsWhileAuthenticating
EapLogoffWhileAuthenticating
ReauthsWhileAuthenticated
EapStartsWhileAuthenticated
EapLogoffWhileAuthenticated
BackendResponses
BackendAccessChallenges
BackendOtherRequestsToSupplicant
BackendNonNakResponsesFromSupplicant 0
BackendAuthSuccesses
BackendAuthFails
CTRL+C ESC q Quit SPACE n Next Page Enter Next Entry a All
show auth_session_statistics
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
DES-3000 Series Layer 2 Switch CLI Reference Manual
ports <portlist>  Specifies a port or range of ports to be displayed.
None.
Used to display the current authentication session statistics.
show auth_session_statistics {ports <portlist>}
The show auth_session statistics command is used to display
the current authentication session statistics of the Switch on a
per port basis.
ports <portlist>  Specifies a port or range of ports to be viewed.
all – Specifies that all ports will be viewed.
None.
186
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0