show fdb
Purpose
Syntax
Description
Parameters
Restrictions
To display the aging time:
DES-3026:4#show fdb aging_time
Command: show fdb aging_time
Unicast MAC Address Aging Time = 300
DES-3026:4#
Example usage:
To display unicast MAC address table:
DES-3000 Series Layer 2 Switch CLI Reference Manual
VLAN Name
: default
MAC Address
: 01-00-5E-00-00-00
Egress Ports
: 1-5,26
Mode
: Static
Total Entries
: 1
DES-3026:4#
Used to display the current unicast MAC address forwarding
database.
show fdb {port <port> | vlan <vlan_name 32> | mac_address
<macaddr> | static | aging_time}
This command will display the current contents of the Switch's
forwarding database.
port <port> The port number corresponding to the MAC destination
address. The Switch will always forward traffic to the specified
device through this port.
<vlan_name 32> The name of the VLAN on which the MAC
address resides.
<macaddr> The MAC address by which the forwarding table will
be viewed.
static Displays the static MAC address entries.
aging_time Displays the aging time for the MAC address
forwarding database.
None.
98