D-Link DES-3010F Command Line Interface Manual page 197

DES-3026:4#config sntp primary 10.1.1.1 secondary
10.1.1.2 poll-interval 30
Command: config sntp primary 10.1.1.1 secondary
10.1.1.2 poll-interval 30
Success.
DES-3026:4#
show sntp
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display SNTP configuration information:
DES-3026:4#show sntp
Command: show sntp
Current Time Source
SNTP
SNTP Primary Server
SNTP Secondary Server
SNTP Poll Interval
DES-3026:4#
enable sntp
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To enable the SNTP function:
DES-3000 Series Layer 2 Switch CLI Reference Manual
Used to display the SNTP information.
show sntp
This command will display SNTP settings information including the
source IP address, time and poll interval.
None.
None.
Enables SNTP server support.
enable sntp
This will enable SNTP support. SNTP service must be separately
configured (see config sntp). Enabling and configuring SNTP support will
override any manually configured system time settings.
None.
Only Administrator-level users can issue this command. SNTP settings
must be configured for SNTP to function (config sntp).
: System Clock
: Enabled
: 10.1.1.1
: 10.1.1.2
: 30 sec
193