D-Link DES-3010F Command Line Interface Manual page 187

To create an 802.1x user:
DES-3026:4#create 802.1x user dtremblett
Command: create 802.1x user dtremblett
Enter a case-sensitive new password:******
Enter the new password again for
confirmation:******
Success.
DES-3026:4#
show 802.1x user
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To view 802.1X users currently configured on the Switch:
DES-3026:4#show 802.1x user
Command: show 802.1x user
Index
--------------
1
The Total Entry is : 1
DES-3026:4#
delete 802.1x user
Purpose
Syntax
Description
Parameters
Restrictions
DES-3000 Series Layer 2 Switch CLI Reference Manual
Used to display the 802.1x user accounts on the Switch.
show 802.1x user
The show 802.1x user command is used to display the 802.1x
Port-based or MAC-based Network Access control local users
currently configured on the Switch.
None.
None.
User Name
--------------
Trinity
Used to delete an 802.1x user account on the Switch.
delete 802.1x user <username 15> {force_agree}
The delete 802.1x user command is used to delete the 802.1x Port-
based or MAC-based Network Access control local users currently
configured on the Switch.
<username 15>  A username can be as many as 15 alphanumeric
characters.
force_agree – Entering this parameter will bypass the "Are you
sure?" question and immediately delete the account.
Only Administrator-level users can issue this command.
183