D-Link DES-3010F Command Line Interface Manual page 35

delete snmp user
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To delete a previously entered SNMP user on the Switch:
show snmp user
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display the SNMP users currently configured on the Switch:
DES-3026:4#show snmp user
Command: show snmp user
Username
----------
initial
Total Entries: 1
DES-3026:4#
create snmp view
Purpose
Syntax
Description
DES-3000 Series Layer 2 Switch CLI Reference Manual
Used to remove an SNMP user from an SNMP group and also to
delete the associated SNMP group.
delete snmp user <SNMP_name 32>
The delete snmp user command removes an SNMP user from its
SNMP group and then deletes the associated SNMP group.
<SNMP_name 32>  An alphanumeric string of up to 32 characters
that identifies the SNMP user that will be deleted.
Only Administrator-level users can issue this command.
DES-3026:4#delete snmp user dlink
Command: delete snmp user dlink
Success.
DES-3026:4#
Used to display information about each SNMP username in the
SNMP group username table.
show snmp user
The show snmp user command displays information about each
SNMP username in the SNMP group username table.
None.
Only Administrator-level users can issue this command.
Group Name SNMP Version
----------- ------------
initial V3
Used to assign views to community strings to limit which MIB objects
and SNMP manager can access.
create snmp view <view_name 32> <oid> view_type [included |
excluded]
The create snmp view command assigns views to community strings
to limit which MIB objects an SNMP manager can access.
Auth-Protocol
-------------
None
31
PrivProtocol
------------
None