Selectable Options - Ricoh B230 Service Manual

Fax Communication Features
Data Formats
The scanned data is converted into a TIFF-F formatted file.
The fields of the e-mail and their contents are as follows:
Field
From
Reply To
To
Bcc
Subject
Content Type
Content Transfer Encoding
Message Body
Direct SMTP Transmission
Internet Fax documents can be sent directly to their destinations without going through the
SMTP server. (Internet Faxes normally transmit via the SMTP server.)
For example:
e-mail address:
SMTP server address:
In this case this feature destination e-mail address (gts@ricoh.co.jp) is read as the SMTP
server address "gts.abcd.com" and the transmissions bypass the SMTP server.

Selectable Options

These options are available for selection:
With the default settings, the scan resolution can be either standard or detail. Inch-mm
conversion before TX depends on IFAX SW01 Bit 7. Detail resolution will be used if
Super Fine resolution is selected, unless Fine resolution is enabled with IFAX SW01.
The requirements for originals (document size, scan width, and memory capacity) are
the same as for G3 fax memory TX.
The default compression is TIFF-F format.
B786
Mail address of the sender
Destination requested for reply
Mail address of the destination
Backup mail address
From CSI or RTI (Fax Message No. xxxx)
Multipart/mixed
Attached files: image/tiff
Base 64, 7-bit, 8-bit, Quoted Printable
MIME-converted TIFF-F (MIME standards specify how
files are attached to e-mail messages)
gts@ricoh.co.jp
gts.abcd.com
132
Content
SM