Ifax Specifications - Ricoh B230 Service Manual

IFAX Specifications

6.2 IFAX SPECIFICATIONS
Connectivity:
Resolution:
Transmission
Time:
Document Size:
E-mail File
Format:
Protocol:
Data Rate:
Authentication
Method:
Remark:
B786
Local area network
Ethernet 100base-Tx/10base-T
IEEE1394 (IP over 1394)
IEEE802.11b (wireless LAN)
Main scan: 400 dpi, 200 dpi
Sub scan: 400 dpi, 200 dpi, 100 dpi
To use 400 dpi, IFAX SW01 Bit 4 must be set to "1".
1 s (through a LAN to the server)
Condition: ITU-T #1 test document (Selerexe Letter)
MTF correction: OFF
TTI: None
Resolution: 200 x 100 dpi
Communication speed: 10 Mbps
Correspondent device: E-mail server
Line conditions: No terminal access
Maximum message width is A4/LT.
To use B4 and A3 width, IFAX SW00 Bit 1 (B4) and/or Bit
2 (A3) must be set to "1".
Single/multi-part
MIME conversion
Image: TIFF-F (MH, MR, MMR)
Transmission:
SMTP, TCP/IP
Reception:
POP3, SMTP, IMAP4, TCP/IP
100 Mbps(100base-Tx)
10 Mbps (10base-T)
SMTP-AUTH
POP before SMTP
A-POP
The machine must be set up as an e-mail client before installation.
Any client PCs connected to the machine through a LAN must
also be e-mail clients, or some features will not work (e.g.
Autorouting).
144 SM