Sensor (Booklet Knife Folding) Removal - Lexmark X940e Service Manual

7510-XXX
6. Remove sensor (booklet knife HP) (A).

Sensor (booklet knife folding) removal

1. Remove the booklet unit assembly. See
1. Remove the Complete booklet unit assembly left cover. See
page 4-128.
2. Rotate knife sector gear clockwise until the flag is in the folding sensor position.
3. Remove one screw securing the sensor (knife HP sensor & knife folding sensor) from the knife frame
assembly.
4. Disconnect the connector from the sensor (booklet knife folding) (A).
4-136
MFP Finisher Service Manual
Connector
A
"Booklet unit assembly removal" on page
Left
4-121.
"Booklet unit assembly left cover" on