7510-XXX
5. Remove the bridge unit assembly (B) from the printer.
Bridge unit top cover removal
1. Remove the bridge unit assembly. See
2. Remove the bridge unit rear cover. See
3. Remove the three screws securing the bracket (A) to the machine.
4. Remove the bracket (A).
5. Remove the two screws securing the bridge unit top cover (A) to the assembly.
6. Remove the bridge unit top cover (A).
7. Remove the two screws securing the two small brackets (C) to the bridge unit top cover (A).
4-6
MFP Finisher Service Manual
"Bridge unit assembly removal" on page
"Bridge unit top cover removal" on page
4-5.
4-6.