Lexmark X940e Service Manual page 64

7510-XXX
Error code or
message
982.01
Service finisher
error
983.00
Service finisher
error
983.01
Service finisher
error
984.00
Service finisher
error
984.01
Service finisher
error
985.00
Service finisher
error
985.01
Service finisher
error
986.00
Service finisher
error
986.01
Service finisher
error
987.00
Service finisher
error
2-6
MFP Finisher Service Manual
Error contents
Sensor (front tamper HP) lag
error
Sensor (rear tamper HP) late
error
Sensor (rear tamper HP) lag
error
Sensor (punch unit HP) late
error
Sensor (punch unit HP) lag
error
Sensor (punch carriage shift
HP) late error
Sensor (punch carriage shift
HP) lag error
Sensor (media eject clamp HP)
late error
Sensor (media eject clamp HP)
lag error
Sensor (media eject shaft HP)
late error
Description/action
The sensing area of the sensor (front tamper HP)
remains interrupted within the specified time after the
front tamper starts moving from the home position.
Go to "982.01 Sensor (front tamper HP) lag error" on
page 2-59.
The sensing area of the sensor (rear tamper HP) is not
interrupted when the rear tamper starts moving to the
home position.
Go to "983.00 Sensor (rear tamper HP) late error" on
page 2-60.
The sensing area of the sensor (rear tamper HP)
remains interrupted within the specified time after the
rear tamper starts moving from the home position.
Go to "983.01 Sensor (rear tamper HP) lag error" on
page 2-61.
The sensing area of the sensor (punch unit HP) is not
interrupted during the specified time after the punch unit
starts moving to the home position.
Go to "984.00 Sensor (punch unit HP) late error" on
page 2-62.
The sensing area of the sensor (punch unit HP) remains
interrupted within the specified time after the punch unit
starts moving from the home position.
Go to "984.01 Sensor (punch unit HP) lag error" on
page 2-63.
The sensing are of the sensor (punch carriage shift HP)
is not interrupted within the specified time after the
punch carriage starts moving to the home position.
Go to "985.00 Sensor (punch carriage shift HP) late
error" on page 2-65.
The sensor (punch carriage shift HP) remains
interrupted within the specified time after the punch
carriage starts moving from the home position.
Go to "985.01Sensor (punch carriage shift HP) lag
error" on page 2-66.
The sensing area of the sensor (media eject clamp HP)
is not interrupted within the specified time after the eject
clamp starts moving to the home position.
Go to "986.00 Sensor (media eject clamp HP) late
error" on page 2-67.
The sensing area of the sensor (media eject clamp HP)
remains interrupted within the specified time after the
eject clamp starts moving from the home position.
Go to "986.01 Sensor (media eject clamp HP) lag
error" on page 2-68.
The sensing area of the sensor (media eject shaft HP) is
not interrupted within the specified time after the media
eject shaft starts moving to the home position.
Go to "987.00 Sensor (media eject shaft HP) late
error" on page 2-70.