Sensor (Booklet Unit Media Exit) Static Jam - Lexmark X940e Service Manual

Step
6 Check the booklet folding/exit drive motor for proper
operation.
1. Enter the Diagnostics Menu.
2. Touch MOTOR TESTS.
3. Touch Finisher Motor Tests.
4. Touch Booklet folding/exit drive motor.
Does the above component operate properly?
7
Check the booklet folding/exit drive motor for proper
connection.
Is the above component properly connected?
8 Perform a print test.
Does the error remain?
9 Perform a print test.
Does the error remain?

289.06 Sensor (booklet unit media exit) static jam

Step
1 Check the booklet unit interface connector assembly.
Is the above component free of damage?
2 Check the main connector on the booklet unit sensor
interface cable assembly.
Is the above component free of damage?
Check
Caution: When performing motor tests,
ensure that all cover and door interlock
switches are overridden.
Check
Yes
Go to step 8. Go to step 7.
Replace the Problem solved.
booklet folding/exit
drive motor.
Go to "Booklet
folding/exit drive
motor assembly
removal" on
page 4-121.
Replace the Problem solved.
booklet controller
card assembly.
Go to "Booklet
controller card
assembly
removal" on
page 4-119.
Go to step 9.
Replace the Problem solved.
finisher controller
card assembly.
Go to "Finisher
controller card
assembly
removal" on
page 4-115.
Yes
Go to step 2. Replace the
booklet unit
interface
connector
assembly.
Go to step 3. Replace the
booklet unit sensor
interface cable
assembly.
Diagnostic information
7510-XXX
No
No
2-51