Sensor (Upper Media Exit) Removal; Upper Media Exit Pinch Roll Assembly Removal - Lexmark X940e Service Manual

7510-XXX

Sensor (upper media exit) removal

1. Open the finisher front door assembly.
2. Remove the rear upper cover. See
3. Remove the upper media bin assembly. See
4. Remove the top cover. See
5. Disconnect the connector from the sensor (upper media exit) (A).
6. Release the hooks securing the sensor (upper media exit) (A) to the finisher.
7. Remove the sensor (upper media exit) (A).

Upper media exit pinch roll assembly removal

1. Open the finisher front door assembly.
2. Remove the rear upper cover. See
3. Remove the upper media bin assembly. See
4. Remove the top cover. See
5. Remove the four screws securing the four upper media exit pinch roll assemblies (A) to the finisher.
Rear
6. Remove the four upper media exit pinch roll assembly (A).
4-102
MFP Finisher Service Manual
"Rear upper cover removal" on page
"Top cover removal" on page
Rear
"Rear upper cover removal" on page
"Top cover removal" on page
A
"Upper media bin assembly removal" on page
4-18.
A
Connector
Left
"Upper media bin assembly removal" on page
4-18.
4-23.
4-19.
4-23.
4-19.
Left