Lexmark X940e Service Manual page 86

7510-XXX
Step Check
5 Check the drive motor (buffer/transport) for proper
connection.
Is the above component properly connected?
6 Check the sensor (diverter gate) for proper operation.
1. Enter the Diagnostics Menu.
2. Touch FINISHER TESTS.
3. Touch Sensor Test.
4. Touch Media Path 2.
5. Touch Diverter gate.
Does the display on the operator panel change every
time the sensing area of the above sensor is
interrupted or blocked?
7 Check the sensor (diverter gate) for proper connection.
Is the above component properly connected?
8
Check the sensor (lower media exit) for proper
operation.
1. Enter the Diagnostics Menu.
2. Touch FINISHER TESTS.
3. Touch Sensor Test.
4. Touch Media Path 1.
5. Touch Lower media exit.
Does the display on the operator panel change every
time the sensing area of the above sensor is
interrupted or blocked?
9 Check the sensor (lower media exit) for proper
connection?
Is the above component properly connected?
10
Perform a print test.
Does the error remain?
2-28
MFP Finisher Service Manual
Yes No
Replace the drive Replace the
motor (buffer/ connection.
transport).
Go to "Drive
motor (buffer/
transport) and
belt (buffer/
transport)
removal" on
page 4-112.
Go to step 8. Go to step 7.
Replace the Replace the
sensor (diverter connection.
gate).
Go to "Sensor
(diverter gate)
removal" on
page 4-107.
Go to step 10. Go to step 9.
Replace the Replace the
sensor (lower connection.
media exit).
Go to "Sensor
(lower media
exit) removal"
on page 4-79.
Replace the Problem solved.
finisher controller
card assembly.
Go to "Finisher
controller card
assembly
removal" on
page 4-115.