Finisher Diverter Gate Removal - Lexmark X940e Service Manual

7510-XXX

Finisher diverter gate removal

1. Open the finisher front door assembly.
2. Remove the rear upper cover. See "Rear upper cover removal" on page 4-23.
3. Open the lower pinch guide assembly (A) to the right.
4. Open the upper pinch guide assembly (B) to the right.
5. Remove the finisher diverter gate solenoid. See "Finisher diverter gate solenoid removal" on page 4-100.
6. Remove the link (C).
7. Move the finisher diverter gate (D) toward the rear, to the right, and forward, as shown.
B
D
C
A
Front
D
Rear
8. Remove the finisher diverter gate (D).
4-89
Repair information