Sensor (Rear Tamper Hp) Late Error - Lexmark X940e Service Manual

7510-XXX
Step Check
5 Check the compiler unit cable assembly for proper
connection.
Is the above component properly connected?
6 Perform a POR.
Does the error continue when the power is turned off/on?

983.00 Sensor (rear tamper HP) late error

Step Check
1 Check the tamper mechanism by moving it manually.
Does the above component slide back and forth properly?
2
Check the sensor (rear tamper HP) for proper operation.
1. Enter the Diagnostics Menu.
2. Touch FINISHER TESTS.
3. Touch Sensor Test.
4. Touch Media Path 2.
5. Touch Rear tamper HP.
Does the display on the operator panel change every time
the sensing area of the above sensor is interrupted or
blocked?
3 Is the sensor (rear tamper HP) properly connected?
Is the above component properly connected?
2-60
MFP Finisher Service Manual
Yes No
Replace the media Replace the
compiler unit connection.
assembly.
Go to "Media
compiler unit
assembly
removal" on
page 4-68.
Replace the Problem solved.
finisher controller
card assembly.
Go to "Finisher
controller card
assembly
removal" on
page 4-115.
Yes No
Go to step 2. Replace the media
compiler unit
assembly.
Go to
compiler unit
assembly
removal" on
page
Go to step 4. Go to step 3.
Replace the Replace the
sensor (rear connection.
tamper HP).
Go to "Sensor
(front tamper HP)
and sensor (rear
tamper HP)
removals" on
page 4-70.
"Media
4-68.