Switch (Bridge Unit Top Cover Interlock) Removal - Lexmark X940e Service Manual

7510-XXX
9. Remove the bridge unit diverter gate solenoid (A).

Switch (bridge unit top cover interlock) removal

1. Remove the bridge unit assembly. See "Bridge unit assembly removal" on page 4-5.
2. Remove the bridge unit left cover. See "Bridge unit left cover removal" on page 4-17.
3. Disconnect the connector from the switch (bridge unit top cover interlock) (A).
4. Release the harness from clamp.
5. Remove the screw securing the bracket (B) to the assembly.
6. Remove the bracket (B).
7. Remove the two screws securing the switch (bridge unit top cover interlock) (A) to the bracket (B).
8. Remove the switch (bridge unit top cover interlock) (A).
4-15
Repair information