Buffer Diverter Gate Removal - Lexmark X940e Service Manual

7510-XXX

Buffer diverter gate removal

1. Open the finisher front door assembly.
2. Move the lower pinch guide assembly (A) to the right.
3. Remove the rear upper cover. See
4. Remove the buffer diverter gate solenoid. See
5. Remove the link (B).
Buffer diverter gate
6. Move the buffer diverter gate (C) toward the rear, the left, and then forward, as shown.
7. Remove the buffer diverter gate (C).
4-90
MFP Finisher Service Manual
"Rear upper cover removal" on page
"Buffer diverter gate solenoid removal" on page
B
C
4-23.
A
Rear
A
4-101.