7510-XXX
Punch carriage shift motor assembly removal
1. Open the finisher front door assembly.
2. Remove the upper media bin assembly. See
3. Remove the top cover. See
4. Remove the rear upper cover. See
5. Remove the punch carriage assembly. See
6. Remove the two screws securing the cover (A) to the punch carriage assembly (B).
7. Remove the cover (A).
8. Remove the two screws securing the punch carriage shift motor assembly (C) to the punch unit assembly (B).
9. Remove the punch carriage shift motor assembly (C).
4-42
MFP Finisher Service Manual
"Upper media bin assembly removal" on page
"Top cover removal" on page
"Rear upper cover removal" on page
"Punch carriage assembly removal" on page
4-18.
4-23.
A
C
B
4-19.
4-40.