7510-XXX
5. Remove sensor (booklet front tamper HP) (A).
Sensor (booklet rear tamper HP) removal
1. Remove the booklet unit assembly. See
2. Remove the booklet unit assembly left cover. See
3. Disconnect the connector from the booklet left tamper sensor.
4. Remove the screw securing the sensor (booklet rear tamper HP) bracket from the booklet unit assembly.
4-132
MFP Finisher Service Manual
Left
"Booklet unit assembly removal" on page
A
Connector
"Booklet unit assembly left cover" on page
4-121.
4-128.