Booklet Bin Hookup Cable Assembly Removal - Lexmark X940e Service Manual

Mfp finisher

Hide thumbs Also See for X940e:

Table of Contents

Booklet bin hookup cable assembly removal

1. Disconnect booklet hookup cable assembly from the booklet bin assembly.

2. Remove rear lower cover. See

"Rear lower cover removal" on page

3. Disconnect the booklet bin hookup cable assembly from the rear of the finisher.

4. Release the clamps securing the booklet bin hookup cable assembly from the finisher.

5. Remove booklet bin hookup cable assembly (A).

Repair information