Booklet Media Entrance Drive Motor Removal - Lexmark X940e Service Manual

7510-XXX
5. Remove the booklet knife sector drive gear 42T (A).
A

Booklet media entrance drive motor removal

1. Remove the booklet unit assembly. See
2. Remove the screws securing the booklet media entrance drive motor cover from the booklet unit.
3. Remove the booklet media entrance drive motor cover.
4. Disconnect the connectors from the booklet media entrance drive motor (A).
5. Remove the two screws securing the booklet media transport from the knife solenoid frame.
4-126
MFP Finisher Service Manual
B
Rear
"Booklet unit assembly removal" on page 4-121.