Sensor (Stacker Bin Level 1) Late Error - Lexmark X940e Service Manual

7510-XXX
Step
3 Check the sensor (booklet unit media exit) for proper
operation.
1. Enter the Diagnostics Menu.
2. Touch FINISHER TESTS.
3. Touch Sensor Test.
4. Touch Booklet path
5. Touch Booklet unit media exit
Does the display on the operator panel change every time
the sensing area of the above sensor is interrupted or
blocked?
4 Check the sensor (booklet unit media exit) for proper
connection.
Is the above component properly connected?
5 Perform a print test.
Does the error remain?
6
Perform a print test.
Does the error remain?

981.00 Sensor (stacker bin level 1) late error

Step Check
1 Check the vertical transport mechanism of the stacker bin
for obstacles and damage.
Are the any obstacles in the vertical transport mechanism of
the stacker bin?
2-52
MFP Finisher Service Manual
Check Yes
Go to step 5. Go to step 4.
Replace the Replace the
sensor (booklet connection.
unit media exit).
Go to "Sensor
(booklet unit
media exit)
removal" on
page 4-138.
Replace the Problem solved.
booklet controller
card assembly.
Go to "Booklet
controller card
assembly
removal" on
page 4-119.
Go to step 6.
Replace the Problem solved.
finisher controller
card assembly.
Go to "Finisher
controller card
assembly
removal" on
page 4-115.
Yes No
Remove Go to step 2.
obstacles.
No