7510-XXX
Upper pinch guide assembly removal
1. Open the finisher front door assembly.
2. Remove the rear upper cover. See
3. Remove the drive motor (buffer/transport). See
removal" on page
4. Remove the three screws securing the hinge of the upper pinch guide assembly (A) on the rear of the finisher.
5. Move the upper pinch guide assembly hinge from the rear of the finisher.
6. Remove the upper pinch guide assembly (A) from the inside of the finisher in the direction of the arrow.
A
4-106
MFP Finisher Service Manual
"Rear upper cover removal" on page
4-112.
Rear
"Drive motor (buffer/transport) and belt (buffer/transport)
Front
4-23.
A