Booklet Rear Tamper Assembly Removal - Lexmark X940e Service Manual

4. Remove the booklet unit assembly left cover (A).

Booklet rear tamper assembly removal

1. Remove the booklet unit assembly. See
2. Remove the booklet unit motor assembly. See
page 4-121.
3. Remove the knife solenoid frame. See
4. Remove the booklet media entrance drive motor. See
page 4-126.
5. Remove the booklet knife sector drive gear 42T. See
6. Remove booklet unit gear train frame. See
7. Remove the booklet unit assembly left cover. See
8. Remove the screw securing the sensor (booklet rear tamper HP).
9. Slide the booklet rear tamper guide out.
10. Remove the e-clip.
11. Remove the two springs from the booklet rear tamper guide.
12. Remove tamper guide.
A
"Booklet unit assembly removal" on page
"Booklet folding/exit drive motor assembly removal" on
"Booklet knife solenoid frame removal" on page
"Booklet media entrance drive motor removal" on
"Booklet knife sector drive gear 42T" on page
"Booklet unit gear train frame removal" on page
"Booklet unit assembly left cover" on page
7510-XXX
4-121.
4-123.
4-125.
4-127.
4-128.
4-129
Repair information