Sensor (Booklet End Guide Hp) Removal - Lexmark X940e Service Manual

7510-XXX
6. Remove Sensor (booklet unit media exit) (A).
Connector
Right
A

Sensor (booklet end guide HP) removal

1. Remove the booklet unit assembly. See "Booklet unit assembly removal" on page 4-121.
2. Remove the booklet unit assembly left cover. See "Booklet unit assembly left cover" on page 4-128.
3. Disconnect the connector from the sensor (booklet end guide HP) (A).
4. Release the hooks securing the sensor (booklet end guide HP) (A) from the booklet unit.
4-139
Repair information