Stacker Bin Upper Limit Error - Lexmark X940e Service Manual

7510-XXX
Step Check
7 Is the stacker bin lift motor assembly connected properly?
8 Perform a POR.
Does the error continue when the power is turned off/on?

981.01 Stacker bin upper limit error

Step Check
1 Check the sensor (stacker bin level 1) for proper operation.
1. Enter the Diagnostics Menu.
2. Touch FINISHER TESTS.
3. Touch Sensor Test.
4. Touch Bin Level.
5. Touch Stacker bin level1.
Does the display on the operator panel change every time
the sensing area of the above sensor is interrupted or
blocked?
2
Check the sensor (stacker bin level 1) for proper
connection.
Is the above component properly connected?
3 Check the sensor (stacker bin level 2) for proper operation.
1. Enter the Diagnostics Menu.
2. Touch FINISHER TESTS.
3. Touch Sensor Test.
4. Touch Bin Level.
5. Touch Stacker bin level2.
Does the display on the operator panel change every time
the sensing area of the above sensor is interrupted or
blocked?
4 Check the sensor (stacker bin level 2) for proper
connection.
Is the above component properly connected?
2-54
MFP Finisher Service Manual
Yes No
Replace the Replace the
stacker bin lift connection.
motor assembly.
Go to "Stacker
bin lift motor
assembly
removal" on
page 4-37.
Replace the Problem solved.
finisher controller
card assembly.
Go to "Finisher
controller card
assembly
removal" on
page 4-115.
Yes No
Go to step 3. Go to step 2.
Replace the Replace the
sensor (stacker connection.
bin level 1).
Go to "Sensor
(stacker bin level
1) removal" on
page 4-33.
Go to step 5. Go to step 4.
Replace the Replace the
sensor (stacker connection.
bin level 2).
Go to "Sensor
(stacker bin level
2) removal" on
page 4-33.