7510-XXX
5. Remove the booklet front tamper motor (A).
A
Booklet rear tamper motor removal
1. Remove the booklet unit assembly. See
2. Remove the booklet unit assembly left cover. See
3. Disconnect the connector from the booklet rear tamper motor (A).
4. Remove the two screws securing the booklet rear tamper motor (A) from the tamper frame assembly.
4-134
MFP Finisher Service Manual
Connector
Left
"Booklet unit assembly removal" on page
"Booklet unit assembly left cover" on page
4-121.
4-128.