Lexmark X940e Service Manual page 329

Mfp finisher

Hide thumbs Also See for X940e:

Table of Contents

5. Remove the two screws securing the bracket (D) to the finisher.

6. Remove the bracket (D).

7. Remove the two screws securing the drive motor (exit) assembly to the bracket (D).

8. Remove the drive motor (exit) assembly (C).

Replacement notes:

The tension of the belt (exit) (B) is automatically adjusted by the force of the spring attached to the belt

tensioner bracket (A).

Tighten the two screws in the order shown.

Repair information