Sensor (Booklet Knife Folding) Removal - Lexmark C950 Service Manual

5058-030
Remove the screw securing the sensor (booklet front tamper HP) bracket from the booklet unit assembly.
4.
5. Remove sensor (booklet front tamper HP) (A).

Sensor (booklet knife folding) removal

1. Remove the booklet unit assembly. See
Remove the Complete booklet unit assembly left cover. See
1.
on page 4-259.
Rotate knife sector gear clockwise until the flag is in the folding sensor position.
2.
Remove one screw securing the sensor (knife HP sensor & knife folding sensor) from the knife frame
3.
assembly.
4. Disconnect the connector from the sensor (booklet knife folding) (A).
Service Manual
4-310
Left
"Booklet unit chassis removal" on page
A
Connector
"Booklet unit assembly left cover removal"
4-260.
Previous
Next
Go Back