7510-XXX
6. Remove the booklet stapler unit assembly (B).
Booklet knife solenoid frame removal
1. Remove the booklet unit assembly. See
"Booklet unit assembly removal" on page
4-121.
2. Remove the booklet unit motor assembly. See
"Booklet folding/exit drive motor assembly removal" on
page
4-121.
3. Disconnect the connectors from the booklet knife solenoid (A).
4. Remove the spring from the booklet knife solenoid frame (A).
5. Remove the five screws securing the booklet gear train frame from the booklet unit assembly.
6. Remove the two e-clips from shaft X & Y.
7. Remove the two bushings from shaft X & Y.
4-123
Repair information