Finisher Motors; Bridge Unit Assembly - Lexmark X940e Service Manual

Finisher motors

Media eject clamp motor
Media eject motor assembly
Stacker bin lift
motor assembly

Bridge unit assembly

When the printer designates the finisher, the media diverter gate in the printer activates, and media is fed from
the printer into the bridge unit assembly.
The bridge unit drive motor is activated by the trigger of the printer's registration clutch, which drives the
transport belts in the bridge unit assembly. The motor power is transmitted to the two belts between the bridge
unit right shaft assembly and the bridge unit left shaft assembly.
The media fed to the bridge unit assembly is securely held between the transport belts and the pinch rolls, and
fed to the finisher.
Bridge unit assembly
Bridge unit drive
motor assembly
Bridge unit
decurler clutch
Sensor (bridge unit
top cover interlock
Sensor (bridge unit
media exit)
Bridge unit bin
media exit solenoid
Drive motor (exit)
Drive motor
(buffer/transport)
Finisher diverter gate solenoid
Buffer diverter solenoid
Drive motor
(entrance paddle)
Sensor (bridge unit
bin media exit)
Bridge unit diverter
gate solenoid
Sensor (bridge unit
media entrance)
General information
7510-XXX
1-7