Finisher Controller Card Assembly Removal - Lexmark X940e Service Manual

Finisher controller card assembly removal

1. Remove the rear upper cover. See
2. Remove the rear lower cover. See
3. Loosen the four screws securing the plate (A) to the finisher.
4. Move the plate (A) to the right and outward.
5. Remove the plate (A).
6. Disconnect the connectors from the finisher controller card assembly (B).
7. Remove the six screws securing the finisher controller card assembly (B).
8. Remove the finisher controller card assembly (B).
"Rear upper cover removal" on page
"Rear lower cover removal" on page
B
Rear
4-23.
4-22.
Rear
A
P8304 P8308 P8389
P8309
P8305
P8302
P8311
P8317 P8315 P8313
7510-XXX
P8306
P8307
P8300
P8301
P8310
P8314
P8316
4-115
Repair information