Sensor (Rear Door Interlock) Removal; Base Printer - Top Removals - Lexmark MX81 series Service Manual

Sensor (rear door interlock) removal

1
Open the printer rear door.
2
Remove the left cover. See
3
Using a flat-tip screwdriver, pry the sensor (rear door interlock) away from the machine.
Note: It might take a small amount of force to remove the sensor (rear door interlock).
4
Disconnect the cable (A) from the sensor (rear door interlock).

Base printer - top removals

•
"Cartridge door removal" on page 346
"Left cover removal (MX71x)" on page
Repair information
296.
345
7463