The VLAN commands in the Command Line Interface (CLI) are listed (along with the appropriate parameters) in the following
table.
Command
create vlan
delete vlan
config vlan
config vlan
config vlan
config gvrp
enable gvrp
disable gvrp
show vlan
show gvrp
enable asymmetric_vlan
disable asymmetric_vlan
show asymmetric_vlan
Each command is listed, in detail, in the following sections.
DGS-3224TGR Gigabit Ethernet Switch CLI Reference Manual
Parameters
<vlan_name 32>
tag <vlanid 1-4094>
advertisement
<vlan_name 32>
<vlan_name 32>
add [tagged|untagged|forbidden]
<portlist>
<vlan_name 32>
delete <portlist>
<vlan_name 32>
advertisement [enable|disable]
<portlist>
all
{state [enable|disable]
ingress_checking [enable|disable]
pvid <vlanid 1-4094>}
<vlan_name 32>
<portlist>
VLAN C
74
16
OMMANDS