D-Link DGS-3224TGR Command Line Interface Reference Manual page 160

Example usage:
To set the maximum number of authentication attempts at 5:
DGS-3224TGR:4# config login_authentication attempt 5
Command: config login_authentication attempt 5
Success.
DGS-3224TGR:4#
show login_authentication
Purpose
Syntax
Description
Parameters
Restrictions
config login_authentication
Purpose
Syntax
Description
Parameters
DGS-3224TGR Gigabit Ethernet Switch CLI Reference Manual
Used to display current login authentication information.
show login_authentication
This command will display the amount of time for login input and
the maximum attempts for login authentication attempts.
None.
None.
DGS-3224TGR:4#show login_authentication
Command: show login_authentication
CONSOLE :default .
TELNET :default .
The amount of time for login input is 100 seconds!
The maximum attempts for Login authentication is 5 !
DGS-3224TGR:4#
Used to display current login authentication information.
config login_authentication {console [default|
method_list_name <method_list_name> ] | telnet [default |
method_list_name <method_list_name> ] |all [default |
method_list_name <method_list_name> ]}
This command will set authentication methods of login applications.
console – The user may configure authentication for users utilizing
the Console (Command Line Interface) application.
telnet – The user may configure authentication for users utilizing
the Telnet application.
all – The user may configure authentication for users utilizing the
Console and Telnet applications.
156