D-Link DGS-3224TGR Command Line Interface Reference Manual page 126

Layer 2 gigabit ethernet switch
Hide thumbs Also See for DGS-3224TGR:
Table of Contents

Advertisement

config access_profile
profile_id <value 1-8> − An integer between 1 and 8 that is used to identify the access profile
Parameters
that will be configured with this command.
add access_id <value 1-255> − Adds an additional rule to the above specified access profile.
The value specifies the relative priority of the additional rule. A lower access ID, the higher
the priority the rule will be given.
ethernet − Specifies that the switch will look only into the layer 2 part of each packet.
vlan <vlan_name 32> − Specifies that the access profile will apply to only to this VLAN.
source_mac <macaddr> − Specifies that the access profile will apply to only packets with this
source MAC address.
destination_mac <macaddr> − Specifies that the access profile will apply to only packets with
this destination MAC address.
802.1p <value 0-7> − Specifies that the access profile will apply only to packets with this
802.1p priority value.
ethernet_type <hex 0x0-0xffff> − Specifies that the access profile will apply only to packets
with this hexidecimal 802.1Q Ethernet type value in the packet header.
ip − Specifies that the switch will look into the IP fields in each packet.
vlan <vlan_name 32> − Specifies that the access profile will apply to only to this VLAN.
source_ip <ipaddr> − Specifies that the access profile will apply to only packets with this
source IP address.
destination_id <value 0-255> − Specifies that the access profile will apply to only packets
with this destination IP address.
dscp <value 0-63> − Specifies that the access profile will apply only to packets that have this
value in their Type-of-Service (DiffServ code point, DSCP) field in their IP packet header.
icmp − Specifies that the switch will examine the Internet Control Message Protocol (ICMP)
field within each packet.
type <value 0-65535> − Specifies that the access profile will apply to this ICMP type value.
code <value 0-255> − Specifies that the access profile will apply to this ICMP code.
DGS-3224TGR Gigabit Ethernet Switch CLI Reference Manual
122

Advertisement

Table of Contents
loading

Table of Contents