D-Link DGS-3224TGR Command Line Interface Reference Manual page 148

config authentication login
Restrictions
Example usage:
To configure the user defined method list "Trinity" with authentication methods TACACS and XTACACS:
DGS-3224TGR:4#config authentication login method_list_name Trinity
method tacacs xtacacs
Command: config authentication login method_list_name Trinity method
tacacs xtacacs
Success.
DGS-3224TGR:4#
Example usage:
To configure the default method list with authentication methods XTACACS and TACACS+:
DGS-3224TGR:4#config authentication login default method xtacacs
tacacs+
Command: config authentication login default method xtacacs tacacs+
Success.
DGS-3224TGR:4#
DGS-3224TGR Gigabit Ethernet Switch CLI Reference Manual
method_list_name – Enter a previously implemented method list name defined by the
user. The user may add one, or a combination of up to four of the following authentication
methods to this method list:
tacacs – Adding this parameter will require the user to be authenticated using
the TACACS protocol from a remote TACACS server.
xtacacs – Adding this parameter will require the user to be authenticated using
the XTACACS protocol from a remote XTACACS server.
tacacs+ – Adding this parameter will require the user to be authenticated using
the TACACS+ protocol from a remote TACACS+ server.
NOTE:
any other authentication that follows it on a method list or on the default
method list.
Only administrator-level users can issue this command.
Entering none or local as an authentication protocol will override
144