Command
create snmp view
config snmp
engineID
create snmp
group
delete snmp
group
create snmp host
delete snmp host
show snmp
engineID
show snmp
groups
show snmp user
show snmp view
show snmp
community
show snmp host
show snmp traps
create
trusted_host
delete
trusted_host
config snmp
system_name
config snmp
system_location
Each command is listed, in detail, in the following sections.
DGS-3224TGR Gigabit Ethernet Switch CLI Reference Manual
Parameters
<view_view 32> [all | <oid>]
<snmp_engineID 10-64>
<groupname 32> [v1 | v2c | v3 [noauth_nopriv | auth_nopriv| auth_priv]] {read_view
<view_name 32> | write_view <view_name 32> | notify_view <view_name 32>}
<goupname 32>
<ipaddr> [v1 | v2c |v3 [noauth_nopriv | auth_nopriv | auth_priv]] <auth_string 32>
<ipaddr>
{<view_name 32>}
{<community_string 32>}
{ipaddr>}
<ipaddr>
<ipaddr>
<sw_name>
<sw_location>
28