D-Link DGS-3224TGR Command Line Interface Reference Manual page 155

create authentication server_group
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To create the server group "group_1":
DGS-3224TGR:4#create authentication server_group group_1
Command: create authentication server_group group_1
Success.
DGS-3224TGR:4#
DGS-3224TGR Gigabit Ethernet Switch CLI Reference Manual
Used to create a user-defined authentication server group.
create authentication server_group <string 15>
This command will create an authentication server group. A server
group is a technique used to group TACACS, XTACACS, and
TACACS+ server hosts into user defined categories for
authentication using method lists. The user may add up to eight
authentication server hosts to this group using the config
authentication server_group command.
<string 15> Enter an alphanumeric string of up to 15 characters to
define the newly created server group.
Only administrator-level users can issue this command.
151