D-Link DGS-3224TGR Command Line Interface Reference Manual page 68

DGS-3224TGR:4# config 802.1p user_priority 1 3
Command: config 802.1p user_priority 1 3
Success.
DGS-3224TGR:4#
show 802.1p user_priority
Used to display the current 802.1p user priority to hardware priority queue mapping in use by
Purpose
the switch.
Syntax show 802.1p user_priority
Description This command will display the current 802.1p user priority to hardware priority queue
mapping in use by the switch.
Parameters None.
None.
Restrictions
Example Usage:
To show 802.1p user priority:
DGS-3224TGR Gigabit Ethernet Switch CLI Reference Manual
DGS-3224TGR:4# show 802.1p user_priority
Command: show 802.1p user_priority
QOS Class of Traffic
Priority-0 -> <Class-1>
Priority-1 -> <Class-3>
Priority-2 -> <Class-0>
Priority-3 -> <Class-1>
Priority-4 -> <Class-2>
Priority-5 -> <Class-2>
Priority-6 -> <Class-3>
Priority-7 -> <Class-3>
DGS-3224TGR:4#
64