Qos Commands - D-Link DGS-3224TGR Command Line Interface Reference Manual

The MAC address priority commands in the Command Line Interface (CLI) are listed (along with the appropriate parameters) in
the following table.
Command
config scheduling
config
scheduling_mechanism
show scheduling
show scheduling_mechanism
config 802.1p user_priority
show 802.1p user_priority
config 802.1p default_priority
show 802.1p default_priority
disable hol_prevention
enable hol_prevention
show hol_prevention
config bandwidth_control
show bandwidth_control
Each command is listed, in detail, in the following sections.
DGS-3224TGR Gigabit Ethernet Switch CLI Reference Manual
Parameters
<class_id 0-7> weight <value 1-15>
[strict|weight_fair]
<priority 0-7> <class_id 0-7>
[<portlist>|all] <priority 0-7>
<portlist>
<portlist>{rx_rate [no_limit | <value 1-1000>] | tx_rate [no_limit
| <value 1-1000>]}
{<portlist>}
QOS C
60
13
OMMANDS