D-Link DGS-3224TGR Command Line Interface Reference Manual page 74

DGS-3224TGR:4#enable mirror
Command: enable mirror
Success.
DGS-3224TGR:4#
disable mirror
Used to disable a previously entered port mirroring configuration.
Purpose
Syntax disable mirror
Description This command, combined with the enable mirror command above, allows you to enter a port
mirroring configuration into the switch, and then turn the port mirroring on and off without
having to modify the port mirroring configuration.
None.
Parameters
Only administrator-level users can issue this command.
Restrictions
Example Usage:
To disable mirroring configurations:
DGS-3224TGR:4#disable mirror
Command: disable mirror
Success.
DGS-3224TGR:4#
show mirror
Purpose Used to show the current port mirroring configuration on the switch.
Syntax show mirror
Description This command displays the current port mirroring configuration on the switch.
None
Parameters
None.
Restrictions
Example Usage:
To display mirroring configuration:
DGS-3224TGR Gigabit Ethernet Switch CLI Reference Manual
DGS-3224TGR:4#show mirror
Command: show mirror
Current Settings
Target Port: 9
Mirrored Port:
RX:
TX: 1-5
DGS-3224TGR:4#
70