D-Link DGS-3224TGR Command Line Interface Reference Manual page 133

config ssh server
Purpose Used to configure the SSH server.
Syntax config ssh server {maxsession <int 1-8>| contimeout <sec 120-600> | authfail <int 2-
20> |rekey [10min |30min | 60min |never]}
Description This command allows you to configure the SSH server.
maxsession <int 1-8> – Allows the user to set the number of times an outside guest may
Parameters
attempt to log on to the switch.
contimeout <sec 120-600> – Allows the user to set the connection timeout.
authfail <int 2-20> – Allows the user to set the maximum number of authentication fail
attempts.
rekey [10min |30min | 60min |never] – Sets the time period that the switch will change the
security shell encryptions.
port –TCP port number.
Restrictions Only administrator-level users can issue this command.
Usage Example:
To configure the SSH server:
DGS-3224TGR:4#config ssh server maxsession 8 contimeout 300 authfail 2
Command: config ssh server maxsession 8 contimeout 300 authfail 2
Success.
DGS-3224TGR:4#
show ssh server
Purpose Used to display the SSH server setting.
Syntax show ssh server
This command allows you to display the current SSH server setting.
Description
None.
Parameters
Restrictions None.
Usage Example:
To display the SSH server:
DGS-3224TGR Gigabit Ethernet Switch CLI Reference Manual
129