D-Link DGS-3224TGR Command Line Interface Reference Manual page 99

show igmp_snooping
Used to show the current status of IGMP snooping on the switch.
Purpose
Syntax show igmp_snooping {vlan <vlan_name 32>}
Description This command will display the current IGMP snooping configuration on the switch.
<vlan_name 32> − The name of the VLAN for which you want to view the IGMP snooping
Parameters
configuration.
None.
Restrictions
Example Usage:
To show IGMP snooping:
DGS-3224TGR:4#show igmp_snooping
Command: show igmp_snooping
IGMP Snooping Global State : Disabled
Multicast router Only
VLAN Name
Query Interval
Max Response Time
Robustness Value
Last Member Query Interval
Host Timeout
Route Timeout
Leave Timer
Querier State
Querier Router Behavior
State
Multicast fast leave
Total Entries
DGS-3224TGR:4#
DGS-3224TGR Gigabit Ethernet Switch CLI Reference Manual
: 1
: Disabled
: default
: 125
: 10
: 2
: 1
: 260
: 260
: 2
: Disabled
: Non-Querier
: Disabled
: Disabled
95