D-Link DGS-3224TGR Command Line Interface Reference Manual page 42

upload
Purpose Used to upload the current switch settings or the switch history log to a TFTP server.
Syntax upload [configuration|log] <ipaddr> <path_filename>
This command is used to upload either the switch's current settings or the switch's history
Description
log to a TFTP server.
configuration − Specifies that the switch's current settings will be uploaded to the TFTP
Parameters
server.
log − Specifies that the switch history log will be uploaded to the TFTP server.
<ipaddr> − The IP address of the TFTP server. The TFTP server must be on the same IP
subnet as the switch.
<path_filename> − Specifies the location of the switch configuration file on the TFTP server.
This file will be replaced by the uploaded file from the switch.
Restrictions The TFTP server must be on the same IP subnet as the switch. Only administrator-level
users can issue this command.
Example Usage:
To upload a configuration file:
DGS-3224TGR Gigabit Ethernet Switch CLI Reference Manual
DGS-3224TGR:4#upload configuration 10.48.74.121
c:\cfg\log.txt
Command: upload configuration 10.48.74.121
c:\cfg\log.txt
Connecting to server................... Done.
Upload configuration...................Done.
DGS-3224TGR:4#
38