D-Link DGS-3224TGR Command Line Interface Reference Manual page 106

Command
show
auth_session_statistics
show radius auth_client
show radius acct_client
config 802.1x auth_mode
enable 802.1x
Purpose Used to enable the 802.1x server on the switch.
Syntax enable 802.1x
The enable 802.1x command enables the 802.1x Port-based Network Access control server
Description
application on the switch.
Parameters None.
Restrictions Only administrator-level users can issue this command.
Example Usage:
To enable 802.1x switch-wide:
DGS-3224TGR:4#enable 802.1x
Command: enable 802.1x
Success.
DGS-3224TGR:4#
disable 802.1x
Purpose Used to disable the 802.1x server on the switch.
Syntax disable 802.1x
The disable 802.1x command is used to disable the 802.1x Port-based Network Access
Description
control server application on the switch.
Parameters None.
Restrictions Only administrator-level users can issue this command.
Example Usage:
To disable 802.1x on the switch:
DGS-3224TGR:4#
Command: disable 802.1x
Success.
DGS-3224TGR:4#
DGS-3224TGR Gigabit Ethernet Switch CLI Reference Manual
Parameters
{ports <portlist>}
[port_based |mac_based]
disable 802.1x
102